What Pump Failures Can Occur? Common Pump Problems & Solutions

Water pumps and booster systems are essential for maintaining water pressure and irrigation. However, users often encounter common pump failures that can disrupt performance. The most searched questions on Google include:

• Why is my booster pump not working?
• Why does the booster pump run continuously?
• Why is my pump not building pressure?
• How to detect a booster pump failure?

In this guide, we explain the most common pump failures and practical solutions to fix them quickly.

1. Pump Not Working at All

Possible Causes:

• Power supply failure
• Blown fuse or tripped circuit breaker
• Faulty pressure switch
• Burned motor or damaged windings
• Stuck pump impeller
• Booster system failure

Solutions:

• Check electrical connections and fuses
• Inspect and adjust the pressure switch
• Contact service if motor is damaged
• Clean or free the impeller
• Repair the booster system if needed

🔍 Covers searches like:
“booster pump not working”, “why pump not starting”

👉 Reliable brands like Grundfos and Wilo reduce these risks with durable motors.

2. Pump Runs Continuously

Possible Causes:

• Pipe leakage in the system
• Pressure tank has lost air
• Incorrect pressure switch setting
• Open valve in discharge line
• Insufficient pump capacity

Solutions:

• Check for leaks in piping
• Refill air in the pressure tank
• Adjust the pressure switch
• Review pump capacity

🔍 Covers searches like:
“booster pump runs continuously”, “pressure setting problems”

👉 DAB booster systems offer easy control panels for better management.

3. Pump Losing Prime (Air in System)

Possible Causes:

• Air leakage in suction line
• Suction pipe not deep enough
• Low well water level
• Faulty check valve
• Pump chamber empty

Solutions:

• Check suction line and seals
• Replace check valve
• Re-prime the pump
• Check well water level

🔍 Covers searches like:
“pump losing prime”, “submersible pump problems”, “irrigation pump issues”

👉 Standart Pompa and Sumak pumps reduce air intake risks in deep wells.

4. Pump Not Building Pressure

Possible Causes:

• Clogged impeller
• Dirty filter
• Pipe scaling or blockage
• Low pressure tank air
• Excessive pipe bends

Solutions:

• Clean filters and impeller
• Inspect pipeline
• Check tank pressure
• Upgrade pump if needed

🔍 Covers searches like:
“pump not building pressure”, “low water pressure in booster system”

👉 Grundfos Hydro Multi systems provide stable high pressure for buildings.

5. Pump Leaking Water

Possible Causes:

• Worn seals or gaskets
• Loose pipe connections
• Damaged tank membrane
• Cracked pump body

Solutions:

• Replace seals and gaskets
• Tighten connections
• Check tank membrane
• Replace pump if cracked

🔍 Covers searches like:
“booster pump leaking water”, “pump repair solutions”

👉 Wilo and Grundfos pumps minimize leakage with high-quality sealing systems.

Extra Notes (High SEO Value)

• Pump making noise → Bearing failure possible
• Pump consumes too much electricity → Wrong pump selection
• Pump cycles frequently → Tank too small or incorrect pressure setting

🔍 Covers:
“how to diagnose booster pump failure”, “how to repair pump system”

FAQ (SEO Optimized)

1. Why is my booster pump not working?

Check power supply and fuses. If unresolved, contact service.

2. Why does the booster pump run continuously?

Possible leakage, low tank pressure or faulty pressure switch.

3. Why is my pump not building pressure?

Clogged filter, worn impeller or incorrect settings.

4. How to detect a pump failure?

Noise, no pressure or continuous operation indicate failure.

5. Which pump brands are available at Pomeka?

Grundfos, Wilo, DAB, Standart Pompa and Sumak.